DOCUMENTATION DISPLAYS Generic 2.4" & 2.8" (Resistive Touch) - Pico
Moddable SDK 5.12.0
Overview
Getting Started
BASE
Reference
Worker
Setup modules
COMMODETTO
Reference
Poco Renderer
Outlines
Creating Fonts
Crypt
Data
DEVICES
Moddable One
Moddable Two
Moddable Three
Moddable Four
Moddable Six
ESP32
ESP8266
nRF52
nRF52 Low Power Notes
Raspberry Pi Pico
M5Core Ink
M5Paper
Wasm
SiLabs Gecko
QCA4020
Moddable Zero
Moddable Display Developer Guide
DISPLAYS
Overview
Adafruit 1.8" ST7735
Adafruit OLED Display
BuyDisplay 2.8" CTP - ESP8266
Crystalfontz ePaper
DotStar
Generic 1.44"
Generic 2.4" & 2.8" (Resistive Touch) - ESP32
Generic 2.4" & 2.8" (Resistive Touch) - ESP8266
Generic 2.4" & 2.8" (Resistive Touch) - Pico
Sharp Memory
Sharp Memory Screen 1.3"
SparkFun TeensyView
Switch Science Reflective LCD
DRIVERS
DESTM32S display
DotStar display
ILI9341 display
LPM013M126A display
LS013B4DN04 display
MCP230XX GPIO expander
NeoStrand
SSD1306 display
SSD1351 display
ST7735 display
Files
IO
TC53 IO
Firmata
NETWORK
Reference
TLS (SecureSocket)
BLE
Ethernet
Web Things
PINS
Reference
Audio Output
PIU
Reference
Localization
Keyboard
Expanding Keyboard
Die Cut
Using After Effects Motion Data
TOOLS
Reference
Manifest
Defines in Manifests
Testing
XS
Handle
JavaScript language considerations on embedded devices using the XS engine
Mods – User Installed Extensions
ROM Colors
Using XS Preload to Optimize Applications
XS Conformance
XS Marshalling
XS Platforms
XS in C
XS linker warnings
xsbug
xst
XS Compartment
XS Profiler
XS Scopes

Generic 2.4" & 2.8" Displays (Resistive Touch) Wiring Guide - Pico

Copyright 2021 Moddable Tech, Inc.
Revised: March 4, 2022

Specs
Size 2.4" & 2.8", 320 x 240
Type TFT LCD
Interface SPI
Drivers video ILI9341, touch XPT2046 (not supported yet)
Availability Generic SPI Displays on eBay
Description These inexpensive displays are available on eBay and other resources.

Note: They are available in touch and non-touch versions which appear very similar.

At this time Moddable sample code does not include display SD card support.

Moddable example code

The balls example is good for testing this display. To run a debug build, use the following build command:

cd $MODDABLE/examples/piu/balls
mcconfig -d -m -p pico/ili9341

ili9341 Module pinout

This is a typical layout of the ili9341 module.

Raspberry Pi Pico Pinout

ILI9341 Display Pico
VCC 3.3V
GND GND
CS GPIO 9
RESET GPIO 12
DC GPIO 7
SDI / MOSI GPIO 11
SCK GPIO 10
LED 3.3V